Documentation YAML for OpenPetra Forms

Inheritance

• generally the yml files inherit from each other (BaseYaml)
  • this allows us to only define the default menu items once, in PetraForm.yaml, and they will be included in all derived forms

Attributes of the root node

• Template: this refers to the C# (.cs) file that is used for the template. The templates are located in csharp\ICT\PetraTools\Templates\Winforms.
  • window: the default template, sufficient for module main screens etc.
    • Examples: Finance Modules Main Menu (FinanceMain.yaml). PetraForm.yaml also points to window.cs.
  • reportwindow: for the reporting screens
  • windowEditUIConnector: this is for bigger edit screens, that require stateful sessions on the server; example: PartnerEdit? APEditSupplier?
  • windowMaintainTable: maintain the rows of a single table, in a grid, with edit section at the bottom; example: SetupCurrency
  • windowEditWebConnectorMasterDetail: edit a master row, and maintain the detail rows; example: APEditDocument
  • windowFind: template for find screens. uses UIConnector for paged search results; example: APMain
  • windowTDS: template for complex find and browse screens that allow to change the data; example: GLBatch
  • usercontrol: template for UserControls.
    • UserControls can be understood as 'sub-forms' or simply parts of a screen whose layout is specified separately from the screen.
  • usercontrolUnbound. Same as usercontrol, except for controls that don't host data fields, e.g. container controls.
• FormType: Is not so important, because Template already defines a lot; at the moment, only the report type is different from the other types; this might change, and we will only need Template but not FormType
  • abstract: if this is just used as a base form for other real forms
  • navigation: the main window, the module windows
  • edit: edit screens
  • crud: CRUD screens (Create, Read, Update, Delete)
  • find, browse: find screens
  • report: reporting screens
• MasterTable: if this is set, you will need to write less DataField attributes for the controls. The name of the controls will be matched to a field in the given table; if such a table field exists, it will be linked to the control.
• DetailTable: similar to MasterTable, but this is for the detail table; controls must have the word Detail after the prefix, eg. txtDetailAmount
• DatatableType: this is used for the DetailTable, if it is derived from a database table, in a dataset; eg UC_GLTransactions: DatatableType: Ict.Petra.Shared.MFinance.GL.Data.GLBatchTDSATransaction
  • Update: better use DatasetType, which allows mapping of tables to their dataset names automatically
• MasterTableType: this is used for the MasterTable, if it is derived from a database table, in a dataset
  • Update: better use DatasetType, which allows mapping of tables to their dataset names automatically
• DatasetType: this will make sure that fields get mapped much easier to the appropriate table and datafield. You can use eg a controlname txtPFamilyFirstName, txtNoSolicitation, etc., and the controls will be mapped to the right table. You can even use data fields from custom tables and custom fields. You have to use the full namespace for DatasetType.
• UsingNamespaces: refer to namespaces that should be included
• Namespace: this is the namespace that this screen should belong to. eg. Ict.Petra.Client.MFinance.Gui.AccountsPayable
  • if you want methods to be linked automatically to a web connector, you need to make sure that there is a webconnector in the same namespace (Server instead of Client, without Gui, but WebConnectors at the end), eg. Ict.Petra.Server.MFinance.AccountsPayable.WebConnectors.
• ClassName: this is only required if the name of the yaml file should not be the same as the name of the class; the naming convention is: TFrmSetupCurrency is the classname, SetupCurrency.cs is the filename; for user controls: TUC_GLJournals is in file UC_GLJournals.cs
• PropertyForSubScreens: this is useful if you use ActionOpenScreen in your actions, because it will assign the property to the new screen (if it has that propery too); eg. in Finance module the ledger number
• TODO: BaseYaml, FormTitle, WindowWidth, WindowHeight

Events

• Events: here you can link form events to methods in your code
  • eg. Activated: {class=System.EventHandler,method=FTheObject.TFrmPetra_Activated}

Actions

• Actions: actions can be used by menuitems, toolbarbuttons, and other controls; this is useful to be able to enable/disable an action on the whole screen, and to only define a certain action once, and refer to it from all controls that trigger the same action
  • eg. actClose: {Label=&Close, ActionId=eClose, Tooltip=Closes this window, Image=Close.ico}
  • eg. actMainMenu: {Label=Petra &Main Menu, ActionClick=FTheObject.OpenMainScreen}
  • Enabled: Actions can depend on other actions or conditions; they will be disabled if the condition is false; eg Enabled: cndSelectedSupplier; this can be set in a grid, with SelectedRowActivates; eg grdSupplierResult: {Dock=Fill, ActionDoubleClick=actSupplierTransactions, SelectedRowActivates=cndSelectedSupplier}

• special situation: create a detail row: see for example APEditDocument.ManualCode.cs; we do use the generated function CreateAApDocumentDetail, but we need to first calculate some actual parameters

• Actions are linked by menu items, toolbar buttons etc either by using attribute Action, or by convention, ie. the name of the control matches the name of the action (eg. mniSaveSettingsAs matches actSaveSettingsAs)

ManualCode

The following functions can be written in the *.ManualCode.cs file, and the next run of nant generateWinforms will pick them up and call them from the generated code. If the functions don't exist, they will not be called from the generated code: this should avoid unnecessary empty functions in the manual code file.

Here are the names of the manual functions:

InitializeManualCode (run before activation)
RunOnceOnActivationManual
ExitManualCode
NewRowManual
StoreManualCode
ShowDataManual
ShowDetailsManual
BeforeShowDetailsManual
GetDataFromControlsManual
GetDetailDataFromControlsManual
ReadControlsManual (for reports)

Controls

• Controls: see Screen scaffolding: controls

Menu & Toolbar

• Menu:
  • Structure
    • A Menu is introduced with the item 'Menu:' in the yaml file.
    • The children under the 'Menu:' entry form the top-level menus, e.g. 'mniFile' represents the 'File' menu.
    • The children under such entries form the menu items of the top-level menus, e.g. 'mniFilePrint' represents the 'Print' Menu item of the 'File' Menu. Children of these children form sub-menus. This can go several levels deep.
  • Naming conventions
    • Menu item names start with 'mni', e.g. mniFilePrint.
    • Use 'mniSeparator' for a horizontal Separator Bar between Menu items.
  • Inheritance of Menus
    • If you are working with a window template derived from PetraForm.yaml, then there is already a mnuMain control with the Close button.
    • When deriving forms from each other the menu items are inherited; use attribute Order with values AlwaysLast, or AlwaysFirst. Whoever is higher in the hierarchy will have more weight.
      • Example: the Help Menu Item in the root yaml file with Order=AlwaysLast will always be last, even if derived forms will have another item with AlwaysLast, which will be inserted before the help menu item.
    • If you use a name for a top-level Menu that already exists in a yaml file that is an ancestor to the yaml file you are working with, Menu items are added to the already existing top level menu.
  • TabControls
    • If you are working with TabPages (e.g. using template controlMaintainTable, deriving from UserControl), you should add a control with name mnuTabPage; the contents of that menu will be added to the main menu when the TabPage is active.
• Toolbar: very similar to Menu, just different names: tbrMain, tbrTabPage
  • Structure
    • A ToolBar is introduced with the item 'Toolbar:' in the yaml file.
    • Currently there is a limit of only one ToolBar for each form.
  • Naming conventions
    • Toolbar item names start with 'tbb', e.g. tbbNewPartner.
    • use 'tbbSeparator' for a vertical Separator Bar between Toolbar items.
  • Inheritance of ToolBars
    • When deriving forms from each other the ToolBar items are inherited; use attribute Order with values AlwaysLast, or AlwaysFirst. Whoever is higher in the hierarchy will have more weight.
      • Example: the 'Save' ToolBar item in the PetraEditForm.yaml file with Order=AlwaysFirst will always be first, even if derived forms will have another item with AlwaysFirst, which will be inserted afer the 'Save' ToolBar item.
  • TabControls
    • If you are working with TabPages (e.g. using template controlMaintainTable, deriving from UserControl), you should add a control with name tbrTabPage; the contents of ToolBar will be added to the ToolBar when the TabPage is active.

Layout

• Layout: TODO (Tabbed pages etc)

Another option for layout is the Controls property that can be used for Panels and GroupBoxes: You can use several rows to arrange the controls and they are aligned in a table layout. see also Layout of Controls